Registering Bluetooth Device; Pairing - Kenwood KDC-X8019BT Instruction Manual

Remarks
• "Auto Answer" (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
"OFF" : Does not answer the phone call automatically.
"0" : A utomatically answers the phone call at once.
"1s" – "99s" : A utomatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• "BT F/W Update" (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/

Registering Bluetooth Device

(Pairing)

To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from Bluetooth devices
1
Turn on this unit
Press the [SRC] button.
2
Start registering this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KENWOOD BT
USB/R-6P1" from the list of connected units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to <Registering PIN
Code> (page 46).
4
By operating the Bluetooth device, start hands-
free connection.
Registering from this unit
1
Enter Bluetooth mode
Press the [ ] button.
✍ You can also select from "Settings" in Menu List
mode.
2
Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings"
Regist.".
Search for the Bluetooth device.
When search is completed, "Finished" is displayed.
3
Select a Bluetooth device
Turn the [VOL] knob and press it when the
desired item is displayed.
4
Input the PIN code
1. Turn the [VOL] knob and press it when the
desired item is displayed.
Select the digit.
2. Turn the [VOL] knob to select the numbers,
and then press the [VOL] knob.
> >
"Pairing" "Device
Next page 3
English
45
|