Pin Code; Notices; Global Positioning System; Aircraft And Hospitals - Leadtek GPS 9537 User Manual

.
3.5. GPS
Navigating

3.6. PIN CODE

The PIN code means Personal Identification Number for Bluetooth device and it is also
called as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is "0000". Generally
speaking, there are two steps in Bluetooth connecting. One is pairing process, the other is link process.
If you need PIN code to pairing and connect, you can use the default pin code, "0000" to connect
Bluetooth device. Our GPS receiver belongs to non-safety connecting, you can use in general
application to finish connecting.

4. Notices

4.1. Global Positioning System

The Global Positioning System (GPS) is operated and maintained by the Government of
the United States of America who are responsible for the availability and the accuracy of the system.
Changes in the operation, availability and accuracy may affect the operation of your GPS receiver.

4.2. Aircraft and Hospitals

Use of devices with an antenna is prohibited on most aircraft and in many hospitals. The
TomTom Wireless GPS receiver is a receiving and transmitting device with two antenna's and should
not be used in these environments.

4.3. Heat Reflective Shields

Modern vehicles may have a heat reflective shield in the windshield, preventing proper
GPS signal reception if the receiver is placed under the windshield. To get proper reception:
(a) Use an external antenna, or
(b) Place the receiver in a different position, or
(c) Attach the cradle to the windshield behind the rearview mirror, where many vehicles have an
opening in the heat reflective shield, indicated by a black outline.

4.4. Important

The information in this document is subject to change without notice. No liability shall be
assumed for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the performance or use of this material. This document
contains information protected by copyright.
The left LED(LED 2) will flash GREEN (or ORANGE when charging) if the
receiver is able to determine the current position.
- - 6