I compact flash interface. It has a standard NMEA output and compatible with all devices accepting a Type I and Type II compact flash slot. The Leadtek 9534 GPS CF Card which include a build in antenna and compatible to laptop, PDA and tablet PC will allow you to find with help of electronic map application to find your way on the streets easier.
3. Applications Leadtek GPS 9534 CF Card receiver is a high performance, low power consumption product. The product applications are as follow. Hand-Held Device for Personal and Portable Positioning and Navigation-- Handheld PC , Pocket PC, Tablet PC.
4. Operation and Test 4.1. Hardware Installation 1. If your PDA or laptop have Compact Flash slot just plug your Compact Flash card into the slot. 2. If you don’t have the Compact Flash slot but you got a PCMCIA slot, then you can apply an adapter to connect your Compact Flash card to PCMCIA slot.
Application Main Screen When you run the application, the main screen appears as shown in the figure below: The main screen include three major parts: 1. Menu bar Provides accesses to all information and setting options. 2. Status bar Shows the current status, including the connection with the GPS, and the satellite data being received.
Page 8
The ball-shaped icon is the data receiving indicator. White: The COM port is currently not receiving data. Blue: The COM port is receiving data. Navigation Messages...
Configuration Tools On the menu bar click Tools. A menu with the following options appears (see the figure on the left below): About Command Connect Disconnect Port Setting Exit Command Select Command and an additional menu bar appears on the bottom of the data window that includes 3 tabs: Initialize, NMEA, and SiRF (see next page)..
Page 10
The NMEA screen T he SiRF screen Initialize screen allows you to allows you to set provides options fo r control how the the reset mode and the data NMEA messages protocol data tr ansmission transmission. Are being out put. Port Setting Select Port Setting from the Tools menu and the Port Setting screen appears.
Page 11
Connect, Disconnect & About Quick Buttons on Menu Bar...
Page 12
Connect Press to build connection with the GPS module The GPS is not co nnected The GPS is connec ted. Automatically detect co mmunic ation pro tocol When this button is pressed, the s ystem will automatically detect the GPS Protocol and Baud Rate of th e port currently en abled. Pause Press to pause the data d isplayed in Development View.
Page 13
Appendix A Installing WinFast Navigator for Pocket PC Note : Microsoft ActiveSync has to be installed on your computer when you install WinFast Navigator. The application interface is shown in the figure to the right. Step 1. Insert the software CD in your CD-ROM drive. The setup screen appears as shown in the figure to the right.
Page 14
Step 2. The Add/Remove Programs dialog box appears. An information box on top of it tells you the application is Retrieving application data from the mobile device. Step 3. The application will next determine the destination location. A dialog box appears asking if you want to install the application at the default location, which is Main Memory on your PDA/pocket PC.
Page 15
Step 4. A dialog box appears showing the progress of installation.
Need help?
Do you have a question about the GPS 9534 and is the answer not in the manual?
Questions and answers