Turning On/Off; Charging; Bluetooth Communication; Gps Navigating Feature - Leadtek GPS 9537 User Manual

charge, LED 1 will show blue color and flash.
2.2. Turn on/off
Turn on
Turn off

2.3. Charging

Low Power
Charging

2.4. Bluetooth Communication

Waiting to
connect
Connected
2.5. GPS
Navigating

2.6. PIN CODE

The PIN code means Personal Identification Number for Bluetooth device and it is also
called as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is "0000".
Generally speaking, there are two steps in Bluetooth connecting. One is pairing process, the
other is link process. If you need PIN code to pairing and connect, you can use the default pin
code, "0000" to connect Bluetooth device. Our GPS receiver belongs to non-safety connecting,
you can use in general application to finish connecting.
To turn on the receiver, press the power button on the topside briefly
(0.5 seconds). The left LED(LED 2) indicator will flash briefly. The right
LED (LED 1) indicator will start flashing.
To turn off the receiver, press the power button on the topside for 3
seconds. The LED indicator will flash briefly before switching off the
receiver.
The right LED(LED 1) indicator will turn RED (normally BLUE) when
battery power becomes low. Connect the receiver to a powers source to
continue operation and to recharge the battery.
The left LED(LED 2) indicator will turn RED (or ORANGE) when the
battery is being charged. When fully charged, the RED indicator will
switch off.
The right LED(LED 1) indicator will flash if there is no communication
between the receiver and another device.
The right LED(LED 1) indicator will turn to continuous lighting when the
receiver is connected through the wireless link with another device.
The left LED(LED 2) will flash GREEN (or ORANGE when charging) if the
receiver is able to determine the current position.
- - 4