Programming Descriptors And Messages; Programming Item Descriptor (Flat-Plu) Procedure - Casio TE-8000F Series User Manual

Programming descriptors and messages

Programming item descriptor (flat-PLU) procedure

Step 1. Press <PGM MODE> two times to turn "PGM-2", select "1.Item Descriptor" and press
Step 2. Select "1.PLU" and press
Step 3. Select the PLU record you want to program by pressing the flat-PLU key directly, by entering PLU record
No. and , or by entering random PLU code and
Step 4. Enter characters and
Step 5. Repeat the step 4., if you program the next record.
Press and repeat the step 3. and 4., if you program to the other record.
Step 6. Press repeatedly to return to the "Step 1. screen".
TE-8000F/8500F User's Manual
.
Step 1. screen
.
Step 3. screen
.
.
Step 2. screen
Step 4. screen
81
E