Table of Contents
Advertisement
network connection and setup
3.
Enter the password.
This is the login password for the
"admin" user who accesses the
camera. The default password is
"4321".
4.
Click [OK].
Auto network setup will be completed.
DYNAMIC IP SETUP
Dynamic IP Environment Setup
•
Example of the Dynamic IP environment
-
If a Broadband Router, with cameras connected, is assigned an IP address by the
DHCP server
-
If connecting the camera directly to modem using the DHCP protocols
-
If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic IP
1.
Run the IP Installer on the user's local
machine to display cameras allocated
with <Dynamic IP> addresses in the
list.
2.
Select a camera in the list, and click
[Manual Set] to check the <Dynamic
IP> of the camera.
If you uncheck <DHCP>, you can
change IP to <Static>.
50_ network connection and setup
Advertisement
Table of Contents
