Speed Control - Jeep Cherokee 2014 User Manual

OPERATING YOUR VEHICLE

SPEED CONTROL

• The Speed Control switches are lo-
cated on the right side of the steering
wheel.
Cruise ON/OFF
• Push the ON/OFF button
vate the Speed Control.
• CRUISE CONTROL READY will appear
on the instrument cluster to indicate
the Speed Control is on.
• Push the ON/OFF button
time to turn the system off. CRUISE CONTROL OFF will appear on the instrument
cluster to indicate the Speed Control is off.
SET
• With the Speed Control on, push and release the SET+ or SET- button to set a
desired speed.
• Once a speed has been set a message CRUISE CONTROL SET TO MPH/KM will
appear indicating what speed was set. An indicator CRUISE will also appear and
stay on in the instrument cluster when the speed is set.
Accel/Decel
To Increase Speed
• When the Electronic Speed Control is set, you can increase speed by pushing the
SET + button.
• The speed increment shown is dependant on the speed of U.S. (mph) or Metric
(km/h) units:
U.S. Speed (mph)
• Pressing the SET + button once will result in a 1 mph increase in set speed.
Each subsequent tap of the button results in an increase of 1 mph.
• If the button is continually pressed, the set speed will continue to increase in
5 mph increments until the button is released. The increase in set speed is
reflected in the EVIC display.
Metric Speed (km/h)
• Pressing the SET + button once will result in a 1 km/h increase in set speed.
Each subsequent tap of the button results in an increase of 1 km/h.
• If the button is continually pressed, the set speed will continue to increase in
5 km/h increments until the button is released. The increase in set speed is
reflected in the EVIC display.
to acti-
a second
31