Jeep Cherokee 2014 User Manual page 25

Memory Seat
• The memory seat feature allows you to
save two different driver seating posi-
tions, driver's outside mirror, and radio
station preset settings. The memory
seat buttons are located on the driver's
door panel.
• Turn the ignition ON. Adjust all
memory profile settings, press the S
(SET) button then press 1 or 2 within
five seconds. The Electronic Vehicle
Information Center (EVIC), will display
which memory position is being set.
• To program a Key Fob to the memory position, place the ignition switch in the
LOCK/OFF position and remove the Key Fob, press and release the LOCK button on
the Key Fob to be programmed within five seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed
Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
Manual Seat
Manual Seat Adjustment
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release it when the seat is at the desired
position. Then, using body pressure,
move forward and backward on the seat
to be sure that the seat adjusters have
latched.
Recliner
• Lean forward in the seat and lift the
recliner lever, then lean back to the
desired position and release the lever.
• Lift the lever to return the seatback to an upright position.
Height Adjustment
• Ratchet the front lever, located on the outboard side of the seat, upward to raise
the seat height.
• Ratchet the lever downward to lower the seat height.
GETTING STARTED
23