Table of Contents
Advertisement
Table 1-1
Network and
management I/O
WoL
Power
ACPI
Cooling
Baseboard
management
Video
1. DIMM = dual inline memory module
2. DDR = double data rate (transfer mode)
3. SAS = serial attached SCSI
4. SATA = serial advanced technology attachment
5. RAID = redundant array of independent disks
6. PCIe = peripheral component interconnect express
7. VGA = video graphics array
8. USB = universal serial bus
Cisco UCS C260 Server Installation and Service Guide
1-4
Cisco UCS
C260
Server Features (continued)
The server provides these rear-panel connectors:
Two 10/100 dedicated management Ethernet ports
•
Two 1-Gb Base-T Ethernet ports
•
Two 10-Gb SFP+ Ethernet ports (on optional modular card)
•
One RS-232 serial connector
•
7
One 15-pin VGA
•
8
Four USB
2.0 connectors
•
•
One front-panel KVM connector that is used with the included KVM cable,
which provides two USB, one VGA, and one serial connector.
The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) standard.
Two power supplies, 1200 W each.
Redundant as 1+1.
This server supports the advanced configuration and power interface (ACPI) 4.0
standard.
Six fan modules, hot-swappable, redundant.
In addition, there is 1 fan in each power supply.
Pilot II BMC, running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the
10/100 dedicated management ports, the 1-Gb LOM ports, the optional 10-Gb SFP+
ports, or a Cisco P81E virtual interface card.
The server CIMC chip includes a Matrox G200 core. The first 8 MB of memory are
allocated to the video core.
connector
Chapter 1
Overview
OL-24342-01
Advertisement
Table of Contents
