Casio Ravine 2 User Manual page 13

CAUTION
• Wipe your handset before opening the battery cover to prevent moisture or dust
from entering.
• Failure to follow the below directions for installing/removing the battery could result
in product failure.
• Fully charge the battery before using the handset for the first time.
1. Remove the battery cover and battery, as
instructed on page 24. Slide the SIM card into
the slot in the direction of the arrow shown in
the figure.
- To remove the SIM card, pull out the SIM
card in the opposite direction of the arrow.
2. Slide the battery into the slot by aligning the
contacts (1) and press down until you hear
"click (2). "
Make sure that the sticker on the battery is put inside when you replace the back
cover. Otherwise it may affect the water resistance function.
22
3. Insert the battery cover into the slots (1) and
press the battery cover in the direction of the
arrow (2).
4. Press down firmly on the side of the battery
cover at each arrow point, as shown in the
figure.
5. Slide the battery cover latch to the LOCK
position in the direction of the arrow shown
in the figure.
CAUTION
• Do not twist the battery cover as shown in the figure below. Doing so can damage
the handset and the battery cover.
• Do not press hard on the battery cover with the battery cover tabs running over the
handset because you may damage the battery cover tabs.
• Be careful not to get the tab of the battery caught between the edges of battery
cover and the handset. Failure to do so will result in the loss of water resistance.
• If you are using a wrist strap (sold separately), be careful not to get it caught
between the battery cover and the handset. Failure to do so will result in the loss of
water resistance.
01
02
03
04
05
23