Compuprint 9300 User Manual page 141

Messages
BUFFER OVERFLOW
CHARACTER LOST
DATA SET OFF
INTERLOCK ERROR
CHECK INSERTION
JAM FRONT1 PATH
CHECK PAPER
JAM FRONT2 PATH
CHECK PAPER
NO PATH AVAILABLE
Indication
A buffer overflow condition
occurred (for the serial
interface).
The DSR Signal is not
connected to the printer
and is not ready for data
transfer (if the serial
interface is selected). This
condition may happen in a
remote connection (via
modem) and the DSR
(DATA SET READY)
signal is missing.
The rear plug cover is not
installed on the printer.
A paper jam error
condition occurred in the
Front1 paper path.
A paper jam error
condition occurred in the
Front2 paper path.
An electromechanical
failure occurs in the paper
paths.
Solution
Turn the printer off and on again, or press
the and
PROGRAM
to clear the buffer.
Press the
ON LINE
condition.
Install the rear plug cover on the printer.
Check the paper path and remove the
jammed paper. Press the
the error condition.
Check the paper path and remove the
jammed paper. Press the
the error condition.
Call Service.
136
key successively
ON LINE
key to reset the error
key to reset
ON LINE
key to reset
ON LINE