Compuprint 9300 User Manual page 125

If at power on the paper is already loaded in a paper path that is different to the paper path used
by the macro which is valid at power-on, independently from the setting of the TEAR function,
the display shows TEAR IF NECESS./EJECT PAPER. If the paper to be ejected is longer than
18" tear it off and press the key again to perform the paper ejection.
PARK
In all the above cases the parking procedure may be interrupted pressing the key.
ALTERNATE
The display shows OPER. INTERRUPTED.
If in any of the above cases you do not tear off the paper and the printer is not able to park it,
because it is too long, the display shows TEAR OFF PAPER/PARK PAPER. Tear off the paper and
press again the key.
PARK
During the parking procedure the display shows PARKING. If the printer is ejecting the paper
(see LABEL selection) the display shows EJECTING.
120