Key Combinations - Fujitsu LIFEBOOK T731 Operating Manual

Working with the notebook

Key combinations

Key combinations cannot be changed.
You can find information on programming the tablet buttons in
the tablet buttons", Page
Shortcut
+
+
+
The tablet button
the two buttons for a shortcut one after the other instead of needing to press
them both at the same time. After pressing the
short time (2 to 3 seconds) to press the second button.
58
59.
Meaning
Starting predefined application A
This button allows you to start a previously defined application.
By default, the button is preconfigured to start the Launch Center application.
Starting predefined application B
This button allows you to start a previously defined application.
By default, the button is preconfigured to start the Windows Journal
application.
Toggle output screen
Use this key combination to select which screen(s) is/are used for display if
an external monitor is connected.
Screen output is possible:
• only on the notebook's LCD screen
• only on the external monitor
• both the LCD screen and the external monitor.
Press the key combination several times to switch through all possible
settings.
If you have connected two external monitors to the port replicator, the
following display outputs are possible:
• only on the notebook's LCD screen
• just the external monitor (analogue)
• simultaneously on the LCD screen (digital)
• both the LCD screen of the notebook and the external monitor (analogue)
You cannot switch output to both external monitors on the Port Replicator
via the key combination.
has a practical delay function: This allows you to press
"Programming
tablet button, you have a
Fujitsu Technology Solutions