Something Not Working - Zanussi ZCE7690 User Manual

Something not working

Please carry out the following checks on your appliance before calling a Service Engineer. It may
be that the problem is a simple one that you can solve yourself without the expense of a service
call.
In-guarantee customers should make sure that the checks have been made as the engineer
will make a charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
Problem
The grill, ovens and timer do
not work.
The grill and second oven work
but the main oven does not.
The grill does not work or cuts
out after being used for a long
period of time.
The timer does not work.
The indicator neons are not
working correctly.
The oven is not cooking evenly.
The oven light fails to illuminate.
The oven fan is noisy.
The oven temperature is too
high or too low.
34
Check that the appliance has been wired in to the appliance
supply and is switched on at the wall.
Check that the main appliance fuse is working.
If you have checked the above:
Allow the appliance to cool for a couple of hours.
appliance should now be working normally.
Check that the time of day has been set on the clock. Check
that the oven is set for manual cooking.
Ensure the cooling fan is running when the grill is on. If the
cooling fan fails, the grill will not operate correctly. Contact
your local Service Force Centre.
Leave the grill door open and allow the grill to cool. After a
couple of hours check that the grill works as normal.
Check that the instructions for the operation of the timer are
being closely followed.
Check that you have selected only the function you require.
Ensure all other controls are in the Off position.
Check that the appliance is correctly installed and is level.
Check that the recommended temperatures and shelf positions
are being used.
The oven light bulb may need replacing.
Check that the oven is level.
Check that the shelves and bakeware are not vibrating in
contact with the oven back panel.
Check that the recommended temperatures and shelf positions
are being used. Be prepared to adjust the temperature up or
down slightly to achieve the results you want.
Refer to the main oven section.
Possible solution
The