Table of Contents
Advertisement
If something is not working
If the appliance doesn't work properly check the following points before asking for service:
PROBLEM
The flow of gas seems abnormal
l
Gas smells in the room
l
The oven doesn't heat
l
Cooking time is too long
l
The oven smokes
l
The oven lamp doesn't work
l
If, after following all the above checks the appliance still doesn't work, call your nearest Service Centre giving them all
the necessary information, such as model and serial number of the appliance.
Service and original spare parts
This machine, before leaving the factory, has been
tested and studied by many experts and specialists, in
order to give you the best results.
Any repair work which needs to be carried out should
be done with the utmost care and attention.
For this reason we reccomend that for any problem you
contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem and the particular model which you own.
8
All manuals and user guides at all-guides.com
SOLUTION
Make sure that:
— the flame spreader holes are not obstructed;
— the pressure regulator is working;
— the bottle valve is completely open.
Make sure that:
— the gas valve is not open;
— the gas supply tube is well positioned and in
good condition; remember to replace it at least
once a year.
Never look for an escape of gas with a match;
instead use detergent water.
Make sure that the oven knobs are in the correct
worrking positions.
Check that the temperature is correct for the type
offood to be cooked.
We advise you to clean the oven after use.
Splashes of fat can occur during the cooking of
meat and, if the oven isn't cleaned properly, these
produce smoke and bad smell. (see paragraph
concerning cleaning).
The lamp has burnt out. To replace it follow the
instructions given in the relevant paragraph.
The guarantee
Your new cooker is covered by guarantee.
You will find the guarantee certificate enclosed. If you
are missing anything contact your retailer, giving the
date of purchase, model, and the registration number
which is printed on the identification plate.
We ask you to bear in mind that for the guarantee to be
operated, it is necessary to fill in and send the larger part
of the guarantee to Zanussi Technical Assistance &
Service within 8 days of purchase, so that we can provide
registration.
We advise you that the smaller part of the certificate, as
well as your receipt and proof of purchase, should be
shown when required to personnel of Zanussi Technical
Assistance & Service.
Without following this procedure, the repair personnel will
have to charge you more for the repair.
Advertisement
Table of Contents
