Canon HV30 Instruction Manual page 82

82 Connecting to a Printer
FUNC.
( 21)
PRINT ORDER
FUNC.
: The image selection screen
appears.
F
ROM THE IMAGE SELECTION SCREEN
1
Select ( ) the still image you
want to mark with a print order.
2
Press ( ) to set the print order.
The number of copies appears in
orange in the box next to the print
order symbol .
3
Set ( ) the number of copies
desired and press (
To cancel the print order, set (
number of copies to 0.
4
Repeat steps 1-3 to mark additional
images with print orders or press
twice to close the menu.
FUNC.
Printing the Still Images Marked with Print
Orders
PRINT
FUNC.
( 21)
1
Connect the camcorder to the
printer using the USB connection –
connection type
in the previous section PC
Connection Diagrams.
2
Press , select (
FUNC.
icon and press (
setup menus.
Press ( )
).
) the
( 74)– shown
1
) the
) to open the
3
Select ( ) [
( ).
• The print setting menu appears.
• The error message "SET
ORDER" appears if you connect a
printer with direct print function and
select [ PRINT] without having set
any print orders beforehand.
4
Make sure that [PRINT] is selected
and press ( ).
Printing starts. The print setting menu
disappears when the printing is
completed.
NOTES
Depending on the connected printer, you can
change some print settings before step 4
( 79).
Cancel Printing/Printing Errors (
Restarting Printing: Open the print settings
menu as explained in steps 2-3 above. In the
print settings menu, select [RESUME] and
press ( ). The remaining images will be
printed.
Printing cannot be restarted when the print
order settings have been changed or if you
deleted a still image with print order settings.
Erasing All Print Orders
FUNC.
( 21)
MENU
FUNC.
CARD OPERATIONS
PRINT ORD.ALL ERASE
YES
FUNC.
PRINT] and press
PRINT
)
80
( 8)