Other Functions; On-Screen Displays - Canon HV30 Instruction Manual

FUNC.
( 21)
Icon of the currently selected
FUNC.
Drive Mode
Desired option
FUNC.
C S
ONTINUOUS HOOTING
H -S C
IGH PEED ONTINUOUS
1
Press PHOTO halfway to activate
the autofocus.
2
Press PHOTO fully and hold it
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed down.
A E B
UTO XPOSURE RACKETING
Press , first halfway to activate
PHOTO
the autofocus and then fully to record
the still image.
Three still images in different exposures
will be recorded on the memory card.
NOTES
The speed and maximum number of
continuous shots is as follows.
- [ CONT.SHOOT.]: Approx. 2.5 images/
second
- [ HISPEED CONT.SHOOT.]: Approx. 4.1
images/second
- Continuous Shooting with flash: Approx. 1.7
images/second
- Maximum number of shots: 60 still images
These figures are approximate and vary with
the recording conditions and subjects.
The actual number of images per second will
be lower when " " (camcorder shake
warning) is displayed on the screen.
/
S
HOOTING

Other Functions

Other Functions

On-Screen Displays

The camcorder keeps a data code
containing the date and time and other
camera data (shutter speed, aperture,
etc.) registered at the time of recording.
You can select the data to be displayed.
Turning the On-Screen Displays On/Off
Repeatedly press
screen displays on/off in the following
sequence.
,
All displays on Only tape-related
1
displays
On-screen displays + Data code
Only on-screen displays on
Only tape-related displays (in stop mode
or playback pause) or All displays off
(during playback)
On-screen displays + Histogram
code on Only on-screen displays on
All displays off
1
Tape related displays: Tape operation icon,
time code and remaining tape display.
2
Data code: Time, date and camera data at the
time of recording. The contents to be
displayed can be selected as explained in the
following section.
3
Histogram display: For still images you can
display the complete camera data registered
at the time of recording. For details on how to
read the histogram display, refer to the
following section.
Other Functions 55
to turn the on-
DISP.
2
on
3
/Data