Synchronization And Midi Machine Control - MOTU MIDI Express XT User Manual

MIDI channel. To the rest of the network, it will then
appear as if the keyboard is transmitting on the new,
destination channel.
Muting and remapping
For information about when muting occurs before
channel mapping and vice versa, see "Muting and
remapping" on page 35.
SYNCHRONIZATION AND MIDI MACHINE
CONTROL
The Sync tab and the sync-related controls at the top of the
window give you control over your MOTU interface's sync
and MMC transport control features.
Transport controls
The transport controls are just like standard tape deck
transports. These buttons control the time code generated
by your MOTU interface when it is in Internal mode.
SMPTE Readout
The SMPTE Readout provides a running update of the
time code being generated or converted by your MOTU
interface. This running update is made possible by MIDI
C L O C K W O R K S
Time Code (MTC) generated by your MOTU interface
and routed to the computer. If the SMPTE Readout is not
responding, make sure the Routings window has a
connection from the MTC Out port on the left to the
computer on the right.
Transport controls Time base, frame
rate and MMC record
mode menus
Figure 5-8: The synchronization and MIDI machine controls.
SMPTE readout
and Locate
buttons
37