Advertisement
PART 6: SERVICE AND TRANSPORT
6.1 Requirements Before Contacting to Service
If the oven does not operate;
The oven may be plugged off, there has been a blow-out. On models fitted with a
timer, time may not be regulated.
If the oven does not heat;
The heat may be not adjusted with oven's heater control switch.
If the interior lighting lamp does not light;
The electricity must be controlled.
It must be controlled whether the lamps are defective. If they are defective, you
can change them as following the guide.
Cooking ( if lower-upper part does not cook equally ) ;
Control the shelf locations, cooking period and heat values according to the
manual.
Except these, if you still have any problem with your product, please call to
the "Authorized Service".
6.2 Information Related to Transport
If you need any transport;
Keep the original case of product and carry it with its original case when
•
needed to be carried. Follow the transport signs on case.
Tape the cooker on upper parts, hats and heads and saucepan carriers to
•
the cooking panels.
Place a paper between the upper cover and cooking panel, cover the upper
•
cover, then tape it to the side surfaces of oven.
Tape cardboard or paper onto the front cover on interior glass of oven as it
•
will be suitable to the trays, for the wire grill and trays in your oven not to
damage to the oven's cover during transport. Also tape the oven's covers to
the side walls.
If it does not have the original case, take measure for the external surfaces (glass
and painted surfaces) of oven against possible blows.
21
Hide quick links:
Advertisement
