Usb Storage Advanced Settings - NETGEAR R6200 User Manual

3.
You can use this screen to select a folder, change the share name, or change the read
access or write access from All – no password to admin.
The user name (account name) for All – no password is guest. The password for admin is
the same one that is used to log in to the router. By default, it is password.
4. Click Apply for your changes to take effect.

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device.
To view or change USB Storage Advanced Settings:
1. Select Advanced > USB Storage > Advanced Settings to display the following
screen:
2.
You can use this screen to specify access to the USB storage device.
• Network Device Name. The default is readyshare. This is the name used to access the
USB device connected to the router.
• Workgroup. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here. The name works only in an operating system that supports
NetBIOS, such as Microsoft Windows.
• Access Method. The access methods are described here.
Network Connection. Enabled by default, this connection allows anyone connected to
the local area network (LAN) to have access to the USB drive.
HTTP. Enabled by default. You can type http://readyshare.routerlogin.net/shares to
access the USB drive.
HTTP (via Internet. Disabled by default. If you enable this setting, remote users can type
http://<public IP address/shares> (for example, http://1.1.10.102/shares) or a URL
domain name to access the USB drive over the Internet. This setting supports file
uploading only.
Dual Band 11ac WiFi Router R6200
USB Storage
53