Configure Usb Storage Advanced Settings - NETGEAR DGND3300v2 User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

Configure USB Storage Advanced Settings

To configure advanced USB settings, from the main menu, select USB > Advanced
Settings. The USB Storage (Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The following table
explains the fields and buttons in the USB Storage (Advanced Settings) screen.
Fields
Network Device Name
Workgroup
Access Method Network Connection
HTTP
HTTP (via Internet)
FTP
FTP (via Internet)
Description
The default is readyshare. This is the name used to access the
USB device connected to the N300 wireless modem router from
your computer.
If you are using a Windows Workgroup rather than a domain, the
workgroup name is displayed here.
Enabled by default, this allows all users on the LAN to have
access to the USB drive.
Disabled by default. If you enable this setting, you can type
http://readyshare to access the USB drive.
Disabled by default. If you enable this settings, remote users can
type http://readyshare to access the USB drive over the
Internet.
Disabled by default.
Disabled by default. If you enable this settings, remote users can
access the USB drive through FTP over the Internet.
USB Storage
70