Keyboard Commands By Number - Bosch VG4 200 Series User Manual

AutoDome Modular Camera System
6

Keyboard Commands by Number

Function Comm Command
Locked
Key No.
On/Off 1 Scan 360°
On/Off 2 Autopan
On/Off 3 Iris Control
On/Off 4 Focus Control
On/Off 7 Play Custom Pre-position
Tour
On/Off 8 Play Pre-position Tour
On/Off 9 Inactivity Mode
On/Off 11 Auto Iris Level adjust
On/Off 14 Set Autopan and Scan
Speed
On/Off 15 Set Pre-position Tour
Period (dwell)
On/Off 18 AutoPivot Enable
On/Off 20 Backlight Comp
On/Off 23 Electronic Shutter
On/Off 24 Stabilization
On/Off 26 Wide Dynamic Range
(WDR camera only)
On/Off 35 White Balance Mode
On 40 Restore Camera Settings Restores all setting to their
On/Off 41 Line Lock Phase Adjust
On/Off 42 Sync Mode
On/Off 43 Auto Gain Control
On/Off 44 Sharpness
On 46 Advanced menu
On 47 View Factory Settings
On/Off 50 Playback A, continuous
On/Off 51 Playback A, single
On/Off 52 Playback B, continuous
On/Off 53 Playback B, single
On/Off 56 Night Mode menu
On/Off 57 Night Mode setting
On/Off 58 Day/Night Threshold
On/Off 60 On Screen Display
On 61 Display Adjust
Bosch Security Systems, Inc.
Description
Autopan without limits
Autopan between limits
Enters menu (auto, manual)
Enters menu (spot, auto, manual)
Activate/Deactivate
Activate/Deactivate
Enters menu (Off, Return to
Scene 1, Recall Previous PTZ
Command)
Enters Iris Level Adjustment menu
Enters speed adjustment slide
bar
Enters dwell adjustment slide bar
Enables/disables AutoPivot
Backlight Compensation
Enters Shutter Speed slide bar
Electronic Stabilization
Activate/Deactivate
Enters White Balance menu
original defaults
Enters delay adjustment slide bar
On–Line Lock
Off–Internal
AGC–On, Auto, Off
Enters Sharpness menu
Enters Main Setup menu
View all menu default settings
Activate/Deactivate
Activate/Deactivate
Activate/Deactivate
Activate/Deactivate
On, Off, Auto (Day/Night only)
Enables/disables Night Mode
(Day/Night only)
On–menu (Day/Night only)
On–enable
Off–disable
Adjust On-screen Display
VG4-200, VG4-300, VG4-500i Series User's Manual
Keyboard Commands by Number | en
Series 200 Series 300 Series 500i
F01U073308 | 3.0 | 2007.09
31