AutoDome Modular Camera System
2.6
Communication Setup Menu
The Communication Setup Menu provides access to baud rate and Bilinx control settings.
Menu items with an * are the default settings.
Communication Setup
Exit...
* AutoBaud:
* Baud Rate
* Bilinx:
Restore Defaults...
* = Factory Setting
Focus / Iris: Select
Communication Setup Menu Choices:
Menu
Exit
AutoBaud
Baud Rate Manually sets the baud rate when
Bilinx
NOTICE! Bilinx protocol is not available on IP cameras.
i
Bosch Security Systems, Inc.
ON
9600
ON
Description
Saves and exits the menu.
Turns AutoBaud detection on.
AutoBaud is set to OFF.
Turns on Bilinx control
communication,
(Only available when not connected
to a Bilinx data interface unit).
VG4-200, VG4-300, VG4-500i Series User's Manual
On-Screen Display Menu Navigation | en
Sub-menu / Description
Toggles ON or OFF.
ON automatically accepts baud
rates from 2400 to 57600.
(Note: If stepping from 2400 to
57600, you must first set the
controller to 19200 for AutoBaud to
detect the higher baud rate.)
Choices are 2400, 4800, 9600,
19200, 38400, and 57600. Then
follow the OSD to confirm the
selection.
Toggles ON or OFF.
F01U073308 | 3.0 | 2007.09
13
Defaul
t
Setting
ON
9600
ON