Electrolux EFA90950 User Manual page 23

Chimney Stack
The chimney consists of two sections.
The lower chimney measures 700mm
and the upper chimney (with the
recirculation grilles on either side)
measures 415mm. The overall installed
measurement is min. 810 - max
1050mm.
Fitting the Chimney
• Position the upper chimney section
and fix the upper part to the frame
using the 2 screws 12c (2,9 x 9,5)
provided.
• Similarly, position the lower chimney
section and fix the lower part to the
frame using the 2 screws 12c (2,9 x
9,5) provided.
Fitting the Hood Body
• Before fixing the hood body to the
frame:
• Screw the 2 screws 12f half way into
the holes provided in the sides of the
bottom of the frame.
• Remove the grease filters from the
hood canopy.
• Remove any activated charcoal filters.
• Lift the hood canopy and engage the
screws 12f in the slots (A) as far as
they will go.
• Working from below, fix the hood
canopy to the frame (B), using the
4 screws 12q and 4 washers 22
provided, then tighten all the screws
securely.
INSTALLING THE COOKER HOOD
12c
12c
12f
12q
electrolux 23
22
B
A
EN