Running - Husqvarna MZ5424S Operator's Manual

Running

1. Release the parking brake by moving the lever
downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut
off the engine.
2. Move the steering controls inwards, out of the
neutral position (N).
3. Release foot pedal latch and lower deck to set
cutting height.
WARNING!
Make sure that no one is near mower
when engaging blade switch.
Make sure the work area is free from
objects that could be thrown by the
rotating blades.
4. Move throttle control to full throttle (rabbit
symbol).
5. Engage the mower deck by pulling out the
blade switch.
30
OPERATION
Parking brake
Cutting height selection
Move the throttle to FULL and engage the mower deck
8058-210
8058-183
8058-161