Caster Wheels; Hardware; Cleaning - Husqvarna MZ5424S Operator's Manual

Caster Wheels

Check every 200 hours. Check that wheels rotate
freely.
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam fill
material to the tires. Excessive loads created
by foam tires will cause premature failures.
Use only O.E.M. specified tires.
Removal and Installation
Remove nut and caster bolt. Pull the wheel out of the
fork.
To reInstall, reverse the order. Tighten caster bolt.
If wheels do not rotate freely, take the unit to the
dealer for service.

Hardware

Check daily. Inspect the entire machine for loose or
missing hardware.

Cleaning

Regular cleaning and washing, especially under the
mower deck, will increase the machine's life-span.
Make it a habit to clean the machine directly after use
(after it is cooled), before the debris sticks.
Use compressed air to clean the top side of mower
deck. For cleaning the underside of the deck, use the
cleanout port.
Attach the connect coupler (from the accessory
packet) to any garden hose. After mowing, snap the
hose to the cleanout port on the deck and turn on the
water supply.
Restart the mower and engage the blades to use the
spinning action to wash away debris. Make sure the
hose is away from the mower blades.
Avoid spraying water on the engine and electrical
components.
When cleaning is complete, turn off the engine, turn
off the water supply to the hose and disconnect the
connect coupler from the deck.
Allow the mower to dry completely before storage.
44
MAINTENANCE
Caster wheel
Clean regularly
Use protective glasses when
cleaning and washing.
8058-014
8058-084