Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
Turn the key clockwise to start the engine.
Choke Control
The choke control is used for cold starts in to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent. Push the choke in once the engine starts.
Fuses
Fuses are located on the left hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
There are two fuses with ratings and functions:
1. 20 A, Primary fuse
2. 7.5 A, Mower deck coupling
20
CONTROLS
Ignition switch
Choke control
Fuses
8058-145
8058-145
8050-082