Remote Control - Pioneer VSX-D1011-G Operating Instructions Manual

Displays & Controls

Remote Control

This page describes the buttons on the remote control used to operate the receiver.
RECEIVER
1
2
DVD/LD
VCR 2
MOVIE
3
STEREO/
DIRECT
MENU
4
SYSTEM
SETUP
AUDIO
5
CHANNEL
6
RF ATT
DIMMER
SIGNAL SEL
7
VIDEO SEL
8
1
RECEIVER (STANDBY/ON) button
Press to turn power of the receiver on or to
standby (off).
2 MULTI CONTROL buttons
These buttons are the basic controls that
switch the mode of the receiver and the
remote control, which allows you to control
your other components.
TV CONT: Press so that the remote control can
operate the TV control commands.
3 Listening mode buttons (see page 43-
45)
SURROUND buttons (MOVIE, MUSIC, |
& ENTER):
MOVIE: Press to put the receiver into MOVIE
listening mode (see page 44).
MUSIC: Press to put the receiver into MUSIC
listening mode (see page 45).
30
| | | | \ \ \ \ \ : Use to select the MOVIE or MUSIC
|
En
listening mode.
9
0
SOURCE
MULTI SYSTEM
OPERATION OFF
-
MULTI CONTROL
TV / SAT VCR1/DVR TV CONT
=
C D
TUNER RECEIVER
ACOUSTIC
MUSIC
INPUT
EQ
SURROUND MULTI CH ~
SB CH
MODE INPUT
MODE
ENTER MIDNIGHT
MUTE
MASTER
VOLUME
!
TUNER EDIT TEXT ON TOP MENU
@
TUNE
GUIDE
ST ST
#
ENTER
RETURN
TUNE
$
− +
TEXT OFF BAND CHANNEL
D.ACCESS MPX CLASS
LOUDNESS TONE EFFECT/CH SEL
ENTER
DISC
DNR BASS/TREBLE
+ −
+
10
HI-BIT
TV CONTROL
SUB TITLE
%
CHANNEL VOLUME REMOTE
SETUP
^
RECEIVER
ENTER: Use this button to enter information
concerning the listening modes.
STEREO/DIRECT: Switches the receiver into
STEREO mode if it was in a different sound
mode or toggles between DIRECT and
STEREO mode (see page 43).
4 SYSTEM SETUP button
Use for all system setups, including the
speaker and sound systems. For more informa-
tion see. "Setting up for Surround Sound"
starting on page 34. For a DVD player use this
button to bring up the DVD menu and for a
tuner use this button in the same way as the
TUNER EDIT button.
5 AUDIO button
Use to switch the audio tracks of a DVD when
in DVD mode.
6 Command button for other components
(see pages 65–66)
Use these buttons to control other components
you selected with the MULTI CONTROL
buttons. You must input the preset code in
order use this function (see page 63).
7 Number buttons
These can be used for many purposes depend-
ing on the mode of the remote control.
When in receiver mode the buttons operate as
below:
DIMMER button (see page 53)
Use to adjust the brightness of the receiver's
display.
LOUDNESS button (see page 48)
Switches the LOUDNESS mode on or off (for
all modes except THX CINEMA and MULTI CH
IN).
TONE button (see page 49)
This button switches between TONE ON and
TONE BYPASS, which bypasses the tone
circuitry.
SIGNAL SELECT button (see page 42)
Press SIGNAL SELECT repeatedly to select one
of the following:
AUTO – If there are analog and digital signals
| | \ | | \ \ \ \
input, the receiver automatically selects the
digital signal.
DIGITAL – To select an optical or coaxial
digital signal.
ANALOG – To select an analog signal.