Eject; Track Search And Fast Forward/Reverse; Disc Loading Slot; Open - Pioneer MEH-P9100R Operation Manual

Track Search and Fast Forward/Reverse

• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search
Fast Forward/Reverse

Open

Press the EJECT button for 1 second, and you can open the front
panel without ejecting an MD.
In case of opening the front panel, you can close it.
Note:
• When opening the front panel, the 1 to 6 buttons are not available.
WARNING:
• Do not use with the front panel left open. If you do leave it open, it
may result in injury in the event of an accident.
0.5 seconds or less
Continue pressing

Disc Loading Slot

You can only load one MD at a time in the Built-in MD player.
Load the MD in the direction of the arrow, with the label side
facing up.
Note:
• Load an MD after confirming the MD shutter (refer to page 78) is
.
closed
• When you load a disc, this product reads information recorded on
the disc such as the number of tracks. While the disc is being read,
"TOC READ" is indicated in the display.
• If you load a disc with the arrow pointing in the wrong direction, it
is automatically ejected.
• If the Built-in MD player cannot operate properly, an error mes-
sage (such as "ERROR-11") appears on the display. Refer to
"Built-in MD Player's Error Message" on page 79.
16