Oldsmobile Silhouette Owner's Manual page 18

Replacing the Split Bench Sections
Don't put the sections of the bench seat in so they face
rearward because they won't latch that way. If you want
more storage room behind the seat, adjust each section
by sliding it forward.
The split benches have seat position labels, located on
the back of each seat, showing where the seat must go.
Follow that diagram.
D
The left (40) section of the 40/60 split bench uses the
A and B sets of floor cups.
D
The right (60) section of the 40/60 split bench uses
the C and D sets of floor cups.
D
The left section of the 50/50 split bench uses the G
and H sets of floor cups.
D
The right section of the 50/50 split bench uses the I
and J sets of floor cups.
See "Seat Controls" in the beginning of this section for
more details. The seat must be placed in the proper
location for the legs to attach correctly.
Make sure the seat is in the full rear position before
beginning this procedure.
1-12
1. Squeeze the angled bar toward the solid crossbar
while placing the front hooks of the bench seat onto
the front two floor pins.
yellowblue