Listening To A Cd Or Mp3/Wma Disc; Disc Playback - Sharp XL-E12H Operation Manual

Micro component system
Table of Contents

Advertisement

General Control (continued)
■ Extra bass control (X-BASS)
Press and hold down (X-BASS)/EQ button, the unit will
enter the extra bass mode which emphasises the bass
frequencies and "X-BASS" indicator will light up.
To cancel the extra bass mode, press and hold down
(X-BASS)/EQ button again.
■ Equaliser
Press (X-BASS)/EQ button, the current mode setting will
be displayed. To change to a different mode, press the (X-
BASS)/EQ button repeatedly until the desired sound
mode appears.
FLAT
ROCK
CLASSIC
POPS
VOCAL
JAZZ
■ Auto power off function
The main unit will enter the stand-by mode after 15
minutes of inactivity during:
CD / USB: In the stop or pause mode.
AUDIO IN: No detection of input signal or very low sound
audibility.
■ Muting
The volume is muted temporarily when pressing the
button on the remote control. Press again to restore the
volume.
■ Function
When the FUNCTION button is pressed, the current
function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD
AUDIO IN
Note:
The backup function will protect the memorized function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
No equalisation.
No equalization.
For rock music.
For rock music.
For classical music.
For classical music.
For pop music.
For pop music.
Vocals are enhanced.
Vocals are enhanced.
For jazz.
For jazz.
USB
FM ST
FM MONO

Listening to a CD or MP3/WMA disc

■ Disc playback

1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button repeatedly to select CD
function.
3
Press the OPEN/CLOSE button on the remote control
or
button on the main unit to open the disc tray.
4
Place the disc on the disc tray, label side up.
5
Press the OPEN/CLOSE button or
disc tray.
6
Press the
/ button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
E-4
button to close the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents