Configuring The Settings - Leadtek 9553 Series User Manual

GPS9553_UM.book Page 16 Monday, August 22, 2005 7:07 PM
Using the Leadtek GPS 9553 Series Wireless Bluetooth Receiver
Refer to the following sections to learn how to configure the port setting and use
the utility.
Remember to disconnect the GPS 9553 Series after you have finished using it to release the
COM port for other applications or users. Tap View on the PDA screen and then select Discon-
nect or Exit to disconnect.
Not e

Configuring the settings

To use the WinFast Navigator utility with the GPS 9553 Series, you have to set
the port and the baud rate as follows:
1. After starting WinFast Navigator, tap "Tools" and select
the "Port Setting..." item from the menu.
2. Select the "NMEA" (National Marine Electronics Asso-
ciation) option under the "GPS Protocol" box.
3. Select a port for the GPS 9553 Series from the "Port"
drop-down box. For most PDAs, it is "COM6". Refer to
the user documentation of your PDA if you are not sure.
4. Select a baud rate from the "BaudRate" drop-down
box.
5. Tap "OK" to complete the settings.
The Navigator screen displays your position when connected successfully.
16