Output Terminal Panel Familiarization - MULTIQUIP WHISPERWATT DCA-400SSV Operation And Parts Manual

DCA-400SSV— OUTPUT TERMINAL PANEL FAMILIARIZATION
Output Terminal Panel
The Output Terminal Panel (Figure 8) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
NOTE
Figure 8. Output Terminal Panel
PAGE 24 — DCA-400SSV— OPERATION AND PARTS MANUAL — REV. #0 (04/19/06)
Terminal legs "O" and "Ground"
are considered bonded grounds .
Output Terminal Familiarization
The " Output Terminal Panel " (Figure 8) is provided with the
following:
■ ■ ■ ■ ■
Three (3) 120/240V output receptacles @ 50 amp
■ ■ ■ ■ ■
Three (3) Circuit Breakers @ 50 amps
■ ■ ■ ■ ■
Two (2) 100V GFCI receptacles @ 20 amp
■ ■ ■ ■ ■
Two (2) GFCI Circuit Breakers @ 20 amps
■ ■ ■ ■ ■
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)