Figure 2-3. Side Panel Removal - Motorola XR900 Series User Manual

Hardware Preparation and Installation
2
2-6
– If the XR900 is to be mounted directly on a Modular
Chassis enclosure, remove the bezel and side panels from
that enclosure.

Figure 2-3. Side Panel Removal

5. Remove the stacking brackets from the top section of the
supporting pedestal unit.
6. Place the XR900 chassis on top of the pedestal unit. Fasten the
XR900 to the pedestal unit with the stacking brackets
removed in the preceding step.
7. Install a second set of stacking brackets (supplied with the
chassis) on the upper section of the XR900.
8. Reinstall the bezel and side panels removed from the
supporting pedestal unit in step 4.
11064.00 9503