Install Main Battery - Motorola MC31XX Series User Manual

1 - 6 MC31XX Series Mobile Computer User Guide
NOTE Select SD cards with environmental and/or the write cycle performance specifications that meet or exceed the
application requirements.
To insert the SD card:
Lift the SD card retaining door.
1.
Position the SD card, with the contacts down, into the SD card slot. The SD card corner notch fits into the slot
2.
only one way.
Close SD card retaining door.
3.
SD Card Retaining Door
Inserting the SD Card
Figure 1-6

Install Main Battery

If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged,
see Battery Charging on page
To install the main battery:
Remove the battery door.
1.
Insert the battery into the slot, bottom first and press the battery gently into the slot. The battery clip locks the
2.
battery into place.
SD Card
1-8. To remove the main battery, see Main Battery Removal on page 1-11.