Back Buttons & Left Side Of Frame; Installing & Replacing The Battery On The Remote Control; Getting Started - NIX Hu-Motion X08D User Manual

1.2 Back buttons & left side of frame
Press and hold for 3s: VOL+/ VOL - . Short press: LEFT/RIGHT
NOTE: / :
2. Installing & Replacing the Battery on the Remote Control
Place the upside of the remote control down, press down on the ridged area of the
battery cover and pull towards you to remove the tray. Place one CR2025 lithium
button-cell battery on the tray with the positive "+"side facing you. Reinsert the tray.

3. Getting Started

3.1 Screw the stand into the stand slot on the back of the Digital Photo Frame, so it sits
horizontally on a flat surface. Then insert the jack of the AC adapter into the back of the
frame (marked 'DC in') and the other end into a standard electrical outlet.
3.2 Remove the protective film covering the LCD.
3.3 Remove the plastic battery insulator from the battery compartment and make sure the
remote control has a battery inside.
3.4 Power on the unit by pressing the Power button on the remote control
1. POWER
2. PREVIOUS/UP
3. PLAY/PAUSE/ENTER
4. VOL +/LEFT
5. VOL - /RIGHT
6. NEXT/DOWN
7. EDIT( Press and hold for 3s )/
RETURN( Short press )
1. SD CARD
2. Earphone Socket
3. USB
4. DC IN
.
5