Setup & 'Hu-Motion' Setup - NIX Hu-Motion X08D User Manual

7. Setup
7.1 Language: English, Spanish
7.2 Photo Sequence: View photos in Sequence or Random
7.3 Slide Mode: Single window, four windows and triple windows
7.4 Slide Speed: 3/5/15/30seconds, 1/5/15/30 minutes and 1hour
7.5 Photo Effect: color, mono, sepia
7.6 Slide Effect: Random, Windows, Jalousie, Fade, Insert, Reel, Brick, 3D Float,
Release, 3D Mix, Comb, 3D Circle, 3D Cube
7.7 Photo Mode: Auto fit, Optimal, Full
7.8 Music Play Mode: Single Repeat, Repeat All, No Repeat
7.9 Video Mode: Screen(Widescreen), Full(Full Screen)
7.10 Video Repeat Mode: Allows you to loop a single video or all videos
7.11 Display
Contrast: Press OK, use
Brightness: Press OK, use
Saturation: Press OK, use
Tint: Press OK, use
7.12 Set Time/Date:
Press OK to enter the time/ date edit interface. Use
Date,Hour, Minute, Second. To edit any of them, highlight and press OK. Now use
to set, then press OK to save. When done, highlight 'Save Time', then press OK.
7.13 Set Time Format: Choose between 12 or 24 hour clock display.
7.14 Hu-Motion Timer:
This allows you to set the timing of the Motion Sensor. Choose between 5/10/30 minutes
or 1 hour. Whatever you choose, this means that if the frame does not sense human
movement within this time, the frame will automatically turn off. When someone re-enters
the room and movement is sensed within 2.5 Meters of the frame, it will turn on again,
to select between 00 (lowest) and 40 (highest).
to select between 00(lowest) and 40 (highest).
to select a point between 00 (lowest) and 40 (highest).
to select between 40 (most color) to 00(least color).
Select Setup from the main menu, then
press OK to access the setup interface.
Use to select the item you want to
set up. Press OK to activate the sub
menu, select with
confirm. Press RETURN to move back to
the setup interface.
to move through Year, Month,
, then press OK to
10