Table of Contents
Advertisement
■ Mechanical Disassemblies
Mechanical disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of
performance and product safety.
z
Cabinet Top and Control Panel removal
1
A
Remove 4 screws
(M3x6) to take the Cabinet Top Ass'y upward off.
2
Remove the Control Panel off from the Cabinet Top by lifting the edge of
control panel.
Control panel
x
Main Board removal
1
Remove 8 screws (M3x6) to take the Main Board upward off.
A
A
A
Main Board
-8-
Screws Expression
(Type
) mm
Diameter x Length
T type
M Type
Cabinet top
A
Fig.1
Fig.2
Advertisement
Table of Contents
