Table of Contents
Advertisement
Electrical Adjustments
1 ⁄ 0
Gamma Shift adjustment
[PC-GAMMA OFF ADJUSTMENT]
1. Receive the 16-step gray scale computer signal.
2. Set to COMPUTER mode.
3. Enter the service mode, select group no. "
6
no. "
" and change data value to reproduce the prop-
er gray scale picture on the screen.
[AV-GAMMA OFF ADJUSTMENT]
4. Receive the 16-step gray scale video signal.
5. Set to VIDEO mode.
6. Enter the service mode, select group no. "
6
no. "
" and change data value to reproduce the prop-
er gray scale picture on the screen.
1 ⁄ 1
White Balance adjustment
[PC WHITE BALANCE ADJUSTMENT]
1. Receive the 16-step gray scale computer signal.
2. Set to COMPUTER mode.
3. Enter the service mode, select group no. "
7
8
"
" (Red) or "
" (Blue), and change data values
respectively to make a proper white balance.
[AV WHITE BALANCE ADJUSTMENT]
4. Receive the 16-step grey scale video signal.
5. Set to VIDEO mode.
6. Enter the service mode, select group no. "
7
8
"
" (Red) or "
" (Blue), and change data values
respectively to make a proper white balance.
Confirm that the same white balance is obtained in
video and computer input.
NOTE ON WHITE UNIFORMITY
ADJUSTMENT
If you find the color shading on the screen, please
adjust the white uniformity by using the proper comput-
er and "Color Shading Correction" software supplied
separately. The software can be ordered as follows;
COLOR SHADING CORRECTION
Service Parts No.
2
", item
2
", item
2
", item no.
2
", item no.
645 051 2308
-29-
Advertisement
Table of Contents
