Change Smbios Event Log Settings; Erase Event Log; When Log Is Full; Log System Boot Event - DFI CL630-CRM User Manual

3
BIOS Setup

Change Smbios Event Log Settings

Enabling/Disabling Options
Smbios Event Log
Erasing Settings

Erase Event Log

When Log is Full

Smbios Event Log Standard Settings

Log System Boot Event

MECI
METW
Custom Options
Log OEM Codes
Convert OEM Codes
Note: All values changed here do not take effect
until computer is restarted.
Erase Event Log
Choose options for erasing Smbios Event Log. Erasing is done prior to any
logging activation during reset.
When Log is Full
Choose options for reactions to a full Smbios Event Log.
Log System Boot Event
Choose options to enable/disable logging of system boot event.
MECI
Multipul Event Count Increment:
The number of occurences of a duplicate event that must pass before the
multiple-event counter associated with the log entry is updated, specifi ed as
a numeric value in a range of 1 to 255.
METW
Multiple Event Time Window:
The number of minutes which must pass between duplicate log entries which
ultilize a multipul-event counter. The value range from 0 to 99 minutes.
90
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Event & Log
Change this to enable
[Enabled] or disable all features of
Smbios Event Logging
during boot.
[No]
[Do nothing]
[Enabled]
1
60


[Enabled]
Enter: Select
[Disabled]
+/ -:
F1:
F2:
F3:
F4:
ESC: Exit
Select Screen
Select Item
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit