Acpi Sleep State - DFI CL630-CRM User Manual

3
BIOS Setup
ACPI Power Management Confi guration
This section is used to confi gure the ACPI Power Management.
ACPI Power Management Confi guration

ACPI Sleep State

S3 Video Repost
Resume by PME
Resume by Ring
Resume by USB
Resume by PS2 KB (S1,S3)
Resume by PS2 MS (S1,S3)
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS)
S3(STR)
S3 Video Repost
When this fi eld is set to Enabled, the system will initialize the VGA BIOS when
it wakes up from the S3 state.
Resume by PME
Enable this fi eld to use the PME signal to wake up the system.
Resume by Ring
Set this fi eld to Enabled to use the modem ring-on function. This will allow
your system to power-on to respond to calls coming through an external or
internal modem.
Resume by USB
About resume by USB; Options are enabled or disabled.
62
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
[S3 only(Suspend to ....) ]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
Select the highest ACPI
sleep state the system will
enter when the SUSPEND
button is pressed.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit