Fisher & Paykel CI604DT Installation Instructions And User Manual page 11

Connecting the cooktop to the mains power supply
Important!
This cooktop must be connected to the mains power supply only by a suitably qualified person.
Before connecting the cooktop to the mains power supply, check that:
the domestic wiring system is suitable for the power drawn by the cooktop.
1
the voltage corresponds to the value given in the rating plate
2
the power supply cable sections can withstand the load specified on the rating plate.
3
To connect the cooktop to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75
Power supply
CI604DT 6950W @220-240/380-415V 2N~ (30A)
CI754DT 7400W @220-240/380-415V 2N~ (32A)
CI905DT 9800W @220-240/380-415V 3N~ (42A)
Important!
Check with an electrician whether the domestic wiring system is suitable without alterations. Any
alterations must only be made by a qualified electrician.
Connection diagrams
Single-phase connection
220-240V~
2 4
1 3
L N
Single-phase connection
220-240V~
2 4
1 3
N
L
o
C at any point.
CI604DT, CI754DT
5
PE
CI905DT
5
PE
Installation instructions
Two-phase connection
380-415V 2N~
2
1
L L
1 2
Three-phase connection
380-415V 3N~
2
1
L L L
1 2
4
3 5
N PE
4
3 5
N PE
3
9