Test Mode - Sharp CD-BA3000 Service Manual

CD-BA3000

TEST MODE

·Setting the test mode
Any one of test mode can be set by pressing several keys as fallows.
<X-BASS> + <CD> + <POWER> TEST:CD operation test
Function:-CD test mode.
C D
<<
<<PLAY>> key input.
Do TOC IL. Do normal play
When these following key is input
into PLAY key, track number can
be appoint directly
<< 1>> key: Track 4
<< 2>> key: Track 9
<< 3>> key: Track 15
<<STOP>> key input.
VOL — Last memory
BAL — CENTER
P.GEQ — FLAT
X-BASS — OFF
To cancel : Power OFF
-Enter test mode.
T E S T
OPEN/CLOSE operation is using manual.
>>, << >> buttons make pick's slide possible.
STOP
<<MEMORY>> key input.
Laser ON.
<<MEMORY>> key input.
Tracking OFF play at that
specific point.
<<MEMORY>> key input.
Tracking ON play at that
specific point.
<<STOP>> key input.
STOP
Sliding the PICKUP with
<< >>, << >> button
must only be in STOP mode.
– 12 –
IL isn't done