Sharp MD-X60H Service Manual page 25

G) ADJUST setting
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the CD PLAY button seven times. [E E P R O M _ S E T]
Step 3 Press once the MD PLAY button. [ _ _ F o c u s _ _ _ ]
Step 4 Press the CD PLAY button six times.
Step 5 Press once the MD PLAY button. [ C O K _ _ _ _ _
Step 6 Press once the CD PLAY button. [ F A T _ _ _ _ _
Step 7 Press once the CD PLAY button. [ T A T _ _ _ _ _
Step 8 Press once the CD PLAY button. [ C A T _ _ _ _ _
Step 9 Press once the CD PLAY button. [ F A B _ _ _ _ _ _
Step 10 Press once the CD PLAY button. [ S T R _ _ _ _ _ _
Step 11 Press once the CD PLAY button. [ S F S _ _ _ _ _ _
Step 12 Press once the CD PLAY button. [ S T C _ _ _ _ _ _
• : Setting value
5. TEST-PLAY mode
(For comfirmation of the playback ability at the named address.)
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the CD
Step 3 Press once the CD STOP button. ADRES setting (Target address initial value is indicated)
Press once the MD PLAY button.
Step 4 Continuous playback (pit section) (Address + C1 error indication)
Continuous playback (groove section) (Address + C1 error indication)
Step 5 Press once the CD STOP button. (Address + ADIP error indication)
Continuous playback (groove section)
Step 6 Press once the MD STOP button. TEST-PLAY menu
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-PLAY menu is displayed, continuous playback is started from the current pickup position.
• Whenever the CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0 0 3 C 0
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
0 0 5 0 0 0 5 0
• The digit of address which has been specified with -
* If the - / + button is held down, the setting changes continuously with 100 ms cycle.
6. TEST-REC mode
With recording mini disk (For comfirmation of the playback ability at the named address.)
Step No. Setting Method
Step 1 Testmode STOP state
Step 2 Press the CD
Step 3 Press once the CD STOP button. ADRES setting (indication of address initial value)
Step 4 Press once the MD PLAY button. While searching, set the search output to "H". To start continuous play,
Step 5 Press once the MD STOP button. TEST-REC menu
• If the MD STOP button is pressed while the TEST-PLAY menu is displayed, TEST mode STOP state is set.
• If the MD PLAY button is pressed while the TEST-REC menu is displayed, continuous record is started from the current pickup position.
• Whenever the CD MD EDIT button is pressed in the address setting mode, the address changes as follows.
0 0 5 0 0 3 C 0
• Whenever the CD STOP button is pressed in the address setting mode, the digit which is changed with -
0 0 5 0 0 0 5 0 0 0 5 0
• The digit of address which has been specified with -
* If the - / + button is held down, the setting changes continuously with 100 ms cycle.
• Be sure to remove since excessive raising results in breakage of the pickup.
Display
[ t s m
[ A D J U S T _ _ _ ]
MD EDIT button. TEST-PLAY menu
0 7 0 0 0 8 A 0 0 0 5 0
0 0 5 0 0 0 5 0 ............
/
MD EDIT button. TEST-REC menu
return it to "L".
Continuous recording
0 7 0 0 0 8 A 0 0 0 5 0
0 0 5 0 ............
/
e ]
]
]
]
]
]
]
]
]
Remarks
............
+ and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
Remarks
............
+ and CD STOP button in the address setting mode is set to +01H/-01H.(0~F)
– 25 –
MD-X60H
Display
[ t s m e ]
[ T E S T _ P L A Y _ ]
[ A D R E S _ 0 0 5 0 ]
[s c ]
[a c ]
[a a ]
[ T E S T _ P L A Y _ ]
/ + changes as follows.
Display
[ t s m e ]
[ T E S T _ R E C _ _ ]
[ a 0 0 5 0 _ p w ]
[ a p w ]
[ T E S T _ R E C _ _ ]
/ + changes as follows.