Library; Display - Numark NS7 Reference Manual

LIBRARY

Show iTunes Library: When checked, the current default iTunes
library and iTunes playlists will be shown in Serato ITCH. (See the
IMPORTING MUSIC section for more information.)
Note: ITCH cannot play files that have been protected by Digital
Rights Management systems like those sold through the Apple
iTunes Music Store.
Protect Library: When checked, your Library will be locked to
prevent accidental deletion of tracks or Crates, and you will be
unable to change file tags or Crate names.
Center on Selected Song: When checked, scrolling up and down
in your Library will hold the selected track in the middle of the
Library panel.
Show All File Types: When checked, you will be able to see all files when importing tracks into your Library. If this option is not
checked, only files that Serato ITCH can play will be displayed. (See the IMPORTING MUSIC section for more information.)
Include Sub-Crate Tracks: When checked, the tracks from any Sub-Crate will be displayed in their "parent" Crate. When this
option is unchecked, browsing a Crate will not show tracks that are in any of its Sub-Crates.

DISPLAY

Maximum Screen Updates: This slider allows you to adjust the
rate at which the software screen refreshes. A lower setting will
potentially use less CPU. Users with slower computers or those
running a recording program at the same time may want to do this if
they are experiencing CPU performance issues.
setting is 60 Hz, or refreshed 60 times per second. This setting
applies to the entire Serato ITCH user interface: the Virtual Decks,
the Waveforms, the Library, and the Setup screen.
Horizontal Waveforms: When checked, main waveforms will be
displayed horizontally across the bottom of the screen.
Left Vertical Waveforms: When checked, main waveforms will be
displayed vertically on the left side of the screen.
Right Vertical Waveforms: When checked, main waveforms will be displayed vertically on the right side of the screen.
MIXER
GENERAL:
Disable Crossfader: When this box is checked, both decks will be
heard in the Program Mix (as though the crossfader were halfway
between them) regardless of the crossfader's position.
EQ:
EQ: When the NS7's EQ knobs are in their maximum (right-most)
position, they will boost that frequency range by the number of
decibels specified here. Select either 6 dB or 12 dB.
OVERDRIVE: "Turn" these virtual knobs by clicking on them and
dragging up (to increase) or down (to decrease) with the mouse.
Mix: Increase the setting on this knob to give the gain of the Program Mix an extra boost. This also includes the BOOTH
OUTPUT signal and the MIC / AUX signal.
Headphone: Increase the setting on this knob to give the gain of the headphones an extra boost. To prevent hearing damage, be
careful not to set this level too high.
The default
14