Related Manuals for Kuppersbusch ITE1390-1
Summary of Contents for Kuppersbusch ITE1390-1
- Page 1 Gebruiks- Notice Benutzer- User manual aanwijzing d'utilisation information Vriezer Freezer Congélateur Gefriergerät ITE1390-1...
-
Page 2: Table Of Contents
Contents Safety information Care and cleaning Control panel What to do if… First use Technical data Daily use Installation Helpful Hints and Tips Environmental concerns Subject to change without notice Safety information In the interest of your safety and to ensure ance. - Page 3 Warning! Any electrical component • Appliance's manufacturers storage rec- (power cord, plug, compressor) must ommendations should be strictly adhered be replaced by a certified service agent to. Refer to relevant instructions. or qualified service personnel to avoid • Do not place carbonated or fizzy drinks in hazard.
-
Page 4: Control Panel
Service in either its refrigerant circuit or insula- tion materials. The appliance shall not • Any electrical work required to do the be discarded together with the urban servicing of the appliance should be car- refuse and rubbish. The insulation foam ried out by a qualified electrician or com- contains flammable gases: the appli- petent person. - Page 5 3. To disconnect the appliance from the change the Timer set value from 1 to power disconnect the mains plug from 90 minutes. the power socket. 3. Press the OK button to confirm. The Drinks Chill indicator is shown. Temperature regulation The Timer start to flash (min).
-
Page 6: First Use
4. The alarm indicator continue to flash When normal conditions are restored (door until the normal conditions are restored. closed), the acoustic alarm will stop. When the alarm has returned the alarm indi- cator goes off. Door open alarm An acoustic alarm will sound when the door is left open for around 80 seconds. -
Page 7: Helpful Hints And Tips
Helpful Hints and Tips Hints for freezing • water ices, if consumed immediately after removal from the freezer compartment, To help you make the most of the freezing can possibly cause the skin to be freeze process, here are some important hints: burnt;... -
Page 8: What To Do If
means that there is no buildup of frost • remove all food when it is in operation, neither on the inter- • defrost and clean the appliance and all nal walls nor on the foods. accessories The absence of frost is due to the continu- •... -
Page 9: Technical Data
Problem Possible cause Solution The temperature in the The temperature regulator is not Set a lower temperature. freezer is too high. set correctly. The door is not closed correctly. Refer to "Closing the door". The product temperature is too Let the product temperature de- high. -
Page 10: Environmental Concerns
This appliance complies with the E.E.C. Di- Climate Ambient temperature rectives. class Ventilation requirements +10°C to + 32°C The airflow behind the appliance must be +16°C to + 32°C sufficient. +16°C to + 38°C +16°C to + 43°C min. 200 cm Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate... - Page 11 222351852-A-092011...
Need help?
Do you have a question about the ITE1390-1 and is the answer not in the manual?
Questions and answers