Symbol Description; Specifications; Product Safety Information; Mounting And Installation Disclaimer - Motion Computing J3500 T008 Product Information

English
This document contains regulatory, precautionary, and
recycling information for the Motion T008 Tablet PC. To
avoid injury, read this document and understand its
contents before you use the Tablet PC. Keep this document
nearby, so you can refer to it later.
For detailed operating instructions and safety information,
see www.motioncomputing.com/docs.
The Motion Tablet PC model T008 is marketed and/or
known as the J3500.
Note: The Motion Tablet PC model T008 is compliant to the
IEC/EN 60950-1:2006+A11:2009 Safety Standard for
Information Technology Equipment.

Symbol description

The following symbols may appear on the products or
accessories.
Canada ICES-003,Class B
2
Federal Communications
Commission
Compliance with Nemko CCL
for general product safety in
accordance with UL 60950-1
(ITE) and CAN/CSA C22.2
No. 60950-1 (ITE)
Canada Interference-Causing
Equipment Standard #3 Class
B devices
Compliance with R&TTE
Directive 1999/5/EC for radio
frequency devices
Conformité Européne;
compliance to EMC and Low
Voltage Directives of the
European Union
Product complies with 2002/
96/EC
Compliance with the
Independent Communications
Authority of South Africa
Compliance with Australian
and New Zealand EMC, EMR,
Radio communication, and
Telecommunication Standards
(A-Tick symbol)
Compliance with the Korea
Certification Commission for
EMC, Safety, and
Telecommunications

Specifications

On
Temperature 5–45° C
0–45° C (with SSD
option)
Humidity 8–90% RH
Air pressure 697–1060 hPa
Power supply Input: 1.5 A, 100–240 VAC, 47–63 Hz
(ITE) Delta Output: 19 V DC, 3.42 A
Electronics, The power supply is compliant with
SADP-65NB UL 60950-1, CAN/CSA C22.2
Rev. BB No. 60950-1, and IEC/EN 60950-1

Product safety information

Motion Tablet PCs are designed to optimize safety,
minimize strain, and withstand the rigors of portability.
However, to further reduce the risk of injury or damage to
the unit, you should observe certain precautions.

Mounting and installation disclaimer

Motion Computing shall not be liable under any theory of
liability (including, without limitation, contract, tort, or
statutory law) for any loss, damage, personal injury, or
other damage of any nature (including, without limitation,
direct, special, incidental, or consequential damages)
arising directly or indirectly as a result of improper or
inappropriate placement, installation, or use of its products
or any other application. To safely install and use Motion
products, full consideration of occupants, systems (e.g., the
location of fuel lines, navigation systems, brakes lines,
electrical, drive train or other systems), air-bags and other
back-up, warning, or safety equipment is required. Without
limiting the foregoing, Motion specifically disclaims any
responsibility for the placement, use, or installation of its
products not consistent with (i) the original manufacturer's
or governmental or regulatory specifications and
recommendations for the environment where the products
will be placed, used, or installed, (ii) Motion written product
instruction sheets, or (iii) workmanship standards.
Infocomm Development
Authority for Singapore
Normalizacion Y Certification
Electronica A.C. (NYCE)
Instituto Argentino de
Normalización y Certificación
(IRAM)
Agência Nacional de
Telecomunicações (ANATEL)
Off (Storage)
-20–60° C
5–95% RH
187–1060 hPa
T008 Safety and Regulatory Guide