Advertisement
QuickSpecs
Accessory Product Details
HP X132 10G SFP+ LC SR
Transceiver (J9150A)
A 10-Gigabit transceiver in
SFP+ form-factor that
supports the 10-Gigabit SR
standard, providing 10-
Gigabit connectivity up to
300 m on multimode fiber.
Notes
Services
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics Power consumption
Cabling
DA - 13280 North America — Version 20 — December 12, 2013
0.5-10,000 m (single-mode fiber)
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-
standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver
can only connect to a 100-BX-D product. You cannot connect two 100-BX-U
transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Refer to the HP website at
www.hp.com/networking/services
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Altitude
typical
Power consumption
maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
Fiber type
HP 2910 al Switch Series
LC
850 nm
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19
cm)
0.04 lb. (0.02 kg)
SFP+
32°F to 158°F (0°C to 70°C)
0% to 85%, noncondensing
-40°F to 185°F (-40°C to 85°C)
up to 10,000 ft. (3 km)
0.6 W
0.8 W
2-300m
Multi Mode
for details on
Page 30
Advertisement
