Advertisement
QuickSpecs
Technical Specifications
Environment
Electrical characteristics Description
Safety
Emissions
Immunity
Switching capacity
Routing table size
MAC address table size
Operating temperature
Operating relative
humidity
Non-operating/
Storage temperature
Non-operating/
Storage relative humidity
Altitude
Acoustic
Maximum heat
dissipation
Voltage
Current
Idle power
Maximum power rating
PoE power
Frequency
Notes
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency
magnetic field
DA - 13280 North America — Version 20 — December 12, 2013
128 Gbps
2000 entries (IPv4)
16000 entries
32°F to 131°F (0°C to 55°C)
15% to 95% @ 104°F (40°C), non-condensing
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 149°F (65°C), non-condensing
up to 10,000 ft (3 km)
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
The switch automatically adjusts to any voltage between 100-127 and 200-
240 volts and either 50 or 60 Hz
447 BTU/hr (472 kJ/hr), max. using PoE+
100-127/200-240 VAC
6.1/3.1 A
65 W
490 W
382 W
50/60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent
on the type and quantity of power supplies and may be supplemented with the
use of a External Power Supply (EPS).
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m
HP 2910 al Switch Series
Page 19
Advertisement
