HP BladeSystem c3000 Specification page 26

Hide thumbs Also See for BladeSystem c3000:

QuickSpecs

Server Blade, Expansion Blade, and Fan Population Guidelines

Fan & power supply bay numbering

Rack power supply bay numbering

Power supplies and fans must be placed in the following bays

Number of Fans

Number of Power Supplies (for PS Redundant or non-redundant

mode)

Number of Power Supplies (for AC Redundant mode)

NOTE: With four fans, the enclosure will support only 4 half-height server blades in the bottom half of the enclosure device bays. With

six fans, all 8 server bays may be filled.

NOTE: For correct operation, fans and server blades must be installed in the correct bays. The Onboard Administrator will ensure that

fans and blades are correctly placed before allowing the system to power on.

DA - 12790 North America — Version 55 — December 10, 2013

HP BladeSystem c3000 Enclosure

Fan bay numbering

Fan Bays Used

2,4,5, 6

All bays filled

Power Supply Bays Used

1 & 2

1, 2, & 3

1, 2, 3, & 4

1 through 5

All bays

Place Power Supplies in Bays:

1 & 4

1, 2, 4, & 5

All bays filled

Page 26

Table of Contents